Structure and working principle of high voltage electrostatic water processor

High voltage electrostatic water processor is based on the new generation of physical water treatment principle, which is mainly composed of rod alloy composite probe and electric control box to generate high voltage electricity. The electric control box outputs more than 18000V direct current to generate a high-voltage electrostatic field around the rod alloy composite probe in water to maintain the continuous treatment of water. According to the characteristics of water molecules, water molecules in natural state are disorderly arranged, but in high-voltage electrostatic field, water molecules will be arranged regularly. It can enclose cations (Ca2 +, Mg2 +) and anions (Cl - and SO42 -) in water to prevent the occurrence of chemical reaction, and form potential difference between water molecules and equipment, and bind the ability of ions to gather to the equipment to prevent scaling. In the high-voltage static circulating water electric field, the electronic binding force between scale molecules can be destroyed, which changes its crystal structure, promotes its looseness, and increases the dipole distance of water molecules to enhance the hydration ability with salt molecules, so that the scale gradually denudes and falls off. Under the action of high-voltage electrostatic field, quantitative ozone (O3) can be generated in water. Ozone has strong oxidation ability, and can form dense oxidation layer of several microns on the inner wall of equipment without scale, which can delay the corrosion of the system. Ozone also has a strong role in killing microorganisms, which is 600-3000 times faster than chlorine, and can quickly kill microorganisms. High voltage electrostatic field also changes the biological field of bacteria and algae derived from water and inhibits their metabolic capacity. Under these comprehensive effects, ozone can quickly and effectively kill microorganisms in water. 2. Installation and operation mode of high voltage electrostatic water treatment equipment: The installation of high-voltage electrostatic water treatment equipment is extremely simple. It can be installed in the pipeline of the system, or dozens or hundreds of units can be installed in the pool or the water tank under the cooling tower. It can process thousands to tens of thousands of tons of circulating water, and can be connected with remote monitoring equipment to monitor the working state of high-voltage electrostatic water processor in the machine room or control center Situation. The power supply can be connected to work. The power consumption of a single unit is less than 15 watts, so it is not necessary to manage it by special personnel. It is only necessary to regularly inspect and observe whether the indicator light of the equipment is working normally.